Black Mosaics WJ-141

Dimensions: 318*283*4 mm
Weight per panel: 0.4 kg
Material: Plastic
Suitable for indoor use

Extremely simple application: peel off the film on the back then press it against the wall, and that's it!

If you're looking for an alternative wall covering solution to painting, wallpapering, or renovations, 3D wall panels are just what you need. 3D wall panels can be easily installed without the help of a professional and guarantee a dust-free and clean installation. They require no renovation and have a long lifespan. They can then be painted in the desired color.

Cost savings

They do not cause problems such as dirt, dust, or stains caused by natural stone or wallpaper, saving you money. They can be used for many years thanks to their recyclable function and do not need to be renewed over time.

How many panels do you need?

The size of one panel is 50*100 cm.

For example, if your wall measures 3.30 cm (width) x 2.60 cm (length) = 8.58 m2, or almost 9 m2, you need to buy 18 panels (9 m2 x 2 = 18). (It is recommended to take more than one or two panels in case of cutting errors, etc.)

Important note

Due to the design and printing techniques of our store's products, colors may vary by an average of 10% from the original products. There may be color differences between the same models ordered at different times.

Use for exterior facades

Izodekor 3D wall panels can also be used outdoors. They insulate against moisture, cold, and heat and do not warp over time. They are waterproof and provide impact protection. To install them outdoors, you will need a cement-based polystyrene adhesive for exterior walls. After installation, you will need to paint the panels with a water-based lacquer. The reason for using lacquer is to prevent discoloration from sunlight over time.

If you're looking for an alternative wall covering solution to painting, wallpapering, or renovations, 3D wall panels are just what you need. 3D wall panels can be easily installed without the help of a professional and guarantee a dust-free and clean installation. They require no renovation and have a long lifespan. They can then be painted in the desired color.

Cost savings

They do not cause problems such as dirt, dust, or stains caused by natural stone or wallpaper, saving you money. They can be used for many years thanks to their recyclable function and do not need to be renewed over time.

How many panels do you need?

The size of one panel is 50*100 cm.

For example, if your wall measures 3.30 cm (width) x 2.60 cm (length) = 8.58 m2, or almost 9 m2, you need to buy 18 panels (9 m2 x 2 = 18). (It is recommended to take more than one or two panels in case of cutting errors, etc.)

Important note

Due to the design and printing techniques of our store's products, colors may vary by an average of 10% from the original products. There may be color differences between the same models ordered at different times.

Use for exterior facades

Izodekor 3D wall panels can also be used outdoors. They insulate against moisture, cold, and heat and do not warp over time. They are waterproof and provide impact protection. To install them outdoors, you will need a cement-based polystyrene adhesive for exterior walls. After installation, you will need to paint the panels with a water-based lacquer. The reason for using lacquer is to prevent discoloration from sunlight over time.

If you're looking for an alternative wall covering solution to painting, wallpapering, or renovations, 3D wall panels are just what you need. 3D wall panels can be easily installed without the help of a professional and guarantee a dust-free and clean installation. They require no renovation and have a long lifespan. They can then be painted in the desired color.

Cost savings

They do not cause problems such as dirt, dust, or stains caused by natural stone or wallpaper, saving you money. They can be used for many years thanks to their recyclable function and do not need to be renewed over time.

How many panels do you need?

The size of one panel is 50*100 cm.

For example, if your wall measures 3.30 cm (width) x 2.60 cm (length) = 8.58 m2, or almost 9 m2, you need to buy 18 panels (9 m2 x 2 = 18). (It is recommended to take more than one or two panels in case of cutting errors, etc.)

Important note

Due to the design and printing techniques of our store's products, colors may vary by an average of 10% from the original products. There may be color differences between the same models ordered at different times.

Use for exterior facades

Izodekor 3D wall panels can also be used outdoors. They insulate against moisture, cold, and heat and do not warp over time. They are waterproof and provide impact protection. To install them outdoors, you will need a cement-based polystyrene adhesive for exterior walls. After installation, you will need to paint the panels with a water-based lacquer. The reason for using lacquer is to prevent discoloration from sunlight over time.

Product information "Ice Berg Grey Wall Panel/Wall Tile"The wall panel

Ice Berg Grey is a representation of a natural stone-look wall tile with a light decor. It creates an elegant look on your walls that will become a real eye-catcher. The Ice Berg Grey variety is particularly popular as a kitchen or bathroom splashback.

Aesthetic Charm of Natural Marble with Its Unique Patterns

• Large PVC marble is an interior cladding material that elegantly mimics the striking beauty of natural marble while providing a durable, cost-effective and environmentally friendly alternative.

• This material revives the aesthetic charm of natural marble with its unique patterns, color tones and veins, while offering practical benefits.

• Thanks to the durability of PVC, it ensures a durable coating for many years.
• Additionally, it is easy to install due to its lighter weight and offers various design options, adding a distinctive aesthetic to spaces.

• Large PVC marble is also easy to maintain, ensuring a long-lasting wall covering with regular cleaning. Offering both aesthetic and practical benefits, large PVC marble is an attractive and functional choice for interior spaces.

• The product measures 120 cm x 60 cm and has a thickness of 3 mm. Thanks to these features, it offers a wide range of applications, from homes to offices, shops to commercial spaces.

Assembly

Our panels are attached with mounting glue, depending on the substrate. The panels are cut to size using a cutting knife, circular saw, or flex. With the marble-look panel, you can give your home a noble look that will amaze both your family and friends. Please feel free to recommend us to others.

Areas of application

• Private rooms

Living room, kitchen (kitchen mirror), bedrooms, hallways, bathrooms, cellars.

• Workplaces

Shop fittings, construction of salons, counters, commercial premises (hairdressers, retail stores, hotels, restaurants, snack bars, gyms, cafes, bars, etc.), other